Original Mopar EVAP Canister (68231653AF) for Chrysler 300C, Dodge Charger and Challenger from 2011 to 2017

Mopar part number: 68231653AF
Replaces: 68057086AC, 68057086AD, 68231653AA, 68231653AB, 68231653AC, 68231653AE
Contains the part numbers: 4593937AC, 4578656AA, 4861962AD, 4578654AA, 52129436AB, 4891564AC
Alternative part numbers: 4891685AA, 4891685AB, 4861962AA, 4861962AB, 4861962AC, 4885827AA, 52129436AA, 4891564AA

Complete set, consisting of EVAP tank, system integrity module detector, pump filter, hose and seal.

Fits:

The EVAP system (short for Evaporative Emission Control System) is an emission-reducing system in vehicles that has been specially developed to control the evaporation of fuel vapours and prevent their release into the atmosphere. These vapours consist of hydrocarbons that are produced during the evaporation of petrol in the fuel tank. The EVAP system captures these vapours and later feeds them to the engine for combustion.

Main components of the EVAP system

1. Fuel tank: This is where the evaporation gases are produced, which must be collected.
2. Activated charcoal filter (charcoal canister)The activated carbon filter stores the rising vapours from the fuel tank. The activated carbon can absorb the hydrocarbon vapours and retain them until they can be fed into the engine.
3. Purge valve (bleed valve)This valve controls the release of the stored vapours. Under certain conditions (e.g. when the engine is running), the valve is opened so that the vapours enter the combustion chamber via the engine intake and are burned there.
4. Pressure sensors and control unitModern vehicles have sensors that monitor the pressure and tightness of the EVAP system. The control unit registers any leaks or malfunctions and can issue an error message (e.g. via the engine indicator light).

How the EVAP system works

• Storing the vapoursAs soon as fuel evaporates in the tank, the vapours rise and are collected in the activated carbon filter.
• Release for incinerationWhen the engine is running, the purge valve opens under controlled conditions and the vapours enter the engine for combustion. In this way, the fuel is utilised efficiently instead of escaping into the environment.
• MonitoringA sealed system is crucial for functionality. Sensors constantly monitor the status of the EVAP system and issue an error message in the event of a leak or malfunction.

Possible problems

Frequent problems in the EVAP system are caused by

• Defective valves or leaksA leaking fuel filler cap or damaged lines in the EVAP system can affect the system pressure and trigger an error message.
• Clogged activated charcoal filter: In older vehicles, the activated charcoal filter may wear out or become blocked so that it can no longer store the vapours effectively.
• Electronic errorsFailure of the control unit or faulty sensors can trigger error messages.

Common error codes in connection with the tank ventilation system

• P0440Performance of the EVAP system
• P0441Monitoring the EVAP vent flow
• P0442EVAP leak monitoring - Medium leak detected
• P0443EVAP vent solenoid valve circuit
• P0444Circuit for the control valve of the EVAP system - Open
• P0445Circuit for the control valve of the EVAP system - short circuit
• P0446Performance of the EVAP vent valve
• P0447Control circuit for the EVAP vent valve - Open
• P0448Control circuit for the EVAP vent valve - short circuit
• P0449Circuit for the EVAP system vent/solenoid valve
• P0450Pressure sensor/switch of the EVAP system
• P0451Pressure sensor/switch of the EVAP system - range/performance
• P0452EVAP pressure sensor circuit - low voltage
• P0453EVAP pressure sensor circuit - overvoltage
• P0454Pressure sensor/switch of the EVAP system - Intermittent
• P0455EVAP leak monitoring - Large leak detected
• P0456EVAP leak monitoring - Small leak (0.020 inch) detected
• P0457EVAP leak detected (fuel filler cap loose/off)
• P0458Circuit for the control valve of the EVAP system - Low
• P0459Circuit for the control valve of the EVAP system - High

Why choose Mopar original spare parts?

Perfect fit and top quality: Mopar original spare parts are manufactured according to strict manufacturer specifications, which means that they fit perfectly in your vehicle. This not only ensures easy installation, but also optimum function and safety.

Reliability and durability: By using high-quality materials and stringent quality controls, Mopar spare parts ensure that your vehicle functions reliably even under extreme conditions. They are designed to last and maximise the performance of your vehicle.