aFe POWER 57-10013R Track Series Carbon Cold Air Intake for Corvette C8

Heat-resistant housing
The dual air filters are surrounded by an XLPE (cross-linked polyethylene) polymer housing with open elements that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory installation position.
The housing is connected to the factory air intakes on each side of the vehicle to capture the coolest air available.
Silicone bellows are used for motor movement and ease of installation. All factory wiring harnesses and brackets are transferred to the rear of the aFe POWER housing to ensure factory installation.
The radio aerial, which is attached to the factory airbox, is also transferred to the aFe POWER housing. To remove the antenna from the airbox, two fused plastic fastening tabs must be cut off.

Seals on the tailgate
The sealing strip installed on the edge of the housing seals against the plastic rear cover to protect the air filters from unwanted warm engine air. This arrangement enables a more aggressive intake noise without compromising performance.

Intake manifold
A lightweight, woven carbon tube guides the filtered air from the dual air filter to the engine. It has been computer designed and bench tested to increase airflow while reducing weight and improving the look of the engine bay. The pipe is made from 100% carbon fiber material (not fiberglass).

Large five-layer high-performance air filters
Dual 4" flange 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the greatest amount of high-flow air and in most cases deliver the highest performance gains of our filter media options. These filter media are perfect for street and/or track use. Their inverted topsides provide a larger filter surface area, resulting in longer service intervals.

High-quality installation material
Stainless steel worm drive clamps and a reinforced silicone hose ensure stability and durability as well as safe and easy installation. Momentum intake systems are designed with as few individual parts as possible to ensure quick and easy installation.

Details

- + 12 hp, + 13 NM maximum power increase
- 15% more flow than the standard air filter
- CAD developed intake manifold
- Pro 5R pre-oiled, washable and reusable air filter for maximum performance
- Unique filter housing design
- Perfect fit
- German installation instructions

Fits:

Note on fit for convertible models:
This item will also fit convertible models, but is not recommended as the weatherstrip will not seal properly with the trunk cover. 58-10007R and 58-10007D is preferred for convertible models because the cover in these kits will properly seal the body.