Description

Hawk Performance high-performancerambrake pads HB649Z.605 for Jeep Grand Cherokee SRT (front axle)

Name: Hawk Performance Ceramic brake pads Grand Cherokee SRT - Kraftwerk
SKU: HB649Z.605-4
Price: 249.00 EUR
Availability: InStock

Hawk understands the needs of today'srambrake pad users and has specifically formulated its composite material to meet and exceed its high noise and dust requirements.
Hawk PC (Performance Ceramic) brake pads are designed to reduce NVH (Noise, Vibration and Harshness) and deliver outstanding performance mile after mile.
The unique compound provides a linear friction profile that allows your Grand Cherokee's ABS system to operate as effectively as possible and has the advantage of having no performance penalty over traditionalrampads.
With Hawk's Performancerambrake pads, you can experience reduced brake pad wear, longer brake disc life and very low noise.

The Hawk Performance Ceramic is a great blend if your top priority is minimizing brake dust. This compound is a very popular replacement for OEM Brembo 6 piston brake used in the Jeep Grand Cherokee.
If you don't want increased braking performance compared to stock and want to virtually eliminate brake dust, Hawk PerformanceramBrake Pads are right for you.

Characteristics:

Extremely quiet
Extremely low in dust
Improved braking power
Gentle on the brake discs
Stable braking performance
35-345°C operating temperature range
35-235 °C optimal temperature range

Fits:

Jeep

Grand Cherokee

6.4

2011 – 2021 with 380 mm brake discs

The price refers to 1 set for the complete front axle.

Additional information

Weight	4.5kg
Size	28 × 20 × 8cm

Product safety

Run-in instructions

Hawk brake pad installation procedure

Install the brake pads properly. Make sure the pads are securely seated in the brake caliper.
Flush the system with fresh brake fluid.
Inspect all hydraulic parts for excessive wear and tear.
Check the brake disc for correct thickness, parallelism and lateral concentricity.
Check the brake disc for scores or grooves deeper than 0.3 mm.
If both apply, you need to replace or replace the disc.
If the disc does not need to be replaced, the impurities from the previous brake pads must be removed. Sand the discs with sandpaper using moderate pressure. After grinding and processing, clean the surface of the disc with soap and water.
The discs should be free of oil, grease and brake fluid.
Check the brake calipers for freedom of movement. Lubricate them if necessary.

Hawk Brake Pad Embedding - Road Compounds

Brake from approximately 50-55 km/h to 10 km/h 6-10 times while applying moderate pressure. Don't come to a standstill.
Carry out another 2 to 3 harder brakes from approx. 65-70 km/h to a standstill.
DON'T STAND ON THE BRAKES! (Do not leave your foot on the brake pedal after stopping).
Allow the brake system to cool for 15 minutes or more.
Your new Hawk pads are now ready for use.

Reviews (0)