KW coilover suspension V4 for Dodge Challenger & Charger Hellcat

Features:

• Lowering VA/HA (mm): 5-30/10-30
• Version: V4
• Hardness adjustment: Rebound and compression damping
• Material: Stainless steel
• Adjustment VA/HA: Thread/Thread
• Approval: Parts certificate (§19.2)

Fits:

Conditions / Notes:

• VA + HA height adjustable (VA coil spring struts, HA springs with height adjustment + damper)
• Dampers have easy-to-use adjustment wheels. Due to the design, the rebound damping can only be adjusted when the piston rod is accessible.
• Electronic damper control must be decommissioned. Electronics set for decommissioning is included in the scope of delivery.

KW V4 coilover suspension

The KW V4 coilover suspension combines leading racing technology with a significant plus in everyday suitability for numerous high-performance vehicles.
This allows independent adjustment of rebound damping as well as low-speed and high-speed compression damping.
KW supplies the V4 coilover suspension with a vehicle-specific performance setting.
The adjustable dampers allow riders to quickly switch to a comfort setting - if necessary - intuitively using the integrated adjustment dials on the damper.

Setup - factory pre-configured damper setup with separate 3-fold damper adjustment

The triple-adjustable high-performance dampers with their independent adjustment of the rebound damping by the "TVR-A" technology as well as the low-speed and high-speed compression damping by the "TVCLH-A" technology are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and are supported by aluminium support bearings depending on the vehicle-specific version. The KW V4 coilover suspension is developed exclusively for selected high-performance vehicles, which can be moved more safely in the dynamic driving limit range thanks to the sophisticated KW suspension technology.

TVR-A rebound damping:
The two-stage patented "TVR-A" technology allows the low volume flows to flow through an adjustable conical low-speed bypass at slow damper speeds and the main rebound valve to open for the high volume flows at higher piston speeds. This results in a significant increase in ride comfort without affecting the high-speed in the safety-relevant range. For individual adjustment, 16 exact clicks are available so that a decision can be made between more comfort or more body control.

TVC-A compression damping:
With 12 precise clicks, the adjustable compression valve ("TVC-A" technology) can reduce or increase the cross-section in the lowspeed valve to achieve more or less compression damping. At the same time, the spring-loaded needle valve, together with the spring-loaded main valve, opens its maximum valve cross-section at abrupt high piston speeds to prevent unwanted progressive force increases in the high-speed range with its blow-off characteristic. This makes it possible to better support the vehicle body and at the same time offer more comfort at high wheel accelerations than with conventional valve technology. The compression damping adjustment is always supplied in conjunction with a separate rebound damping adjustment, as only an independent 2-way damping adjustment allows true performance optimisation.

Stepless Lowering

The KW V4 coilover suspension allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.

The Benchmark for Coilovers

As with all KW coilovers, KW engineers develop the vehicle-specific KW damper tuning appreciated by car enthusiasts worldwide in extensive test cycles on the Nürburgring Nordschleife and in the test centre on the KW 7-post driving dynamics test bench. So with a KW coilover suspension, you experience your car more directly and dynamically.

After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW uses only its own resources, high-quality components and the same damper technology as mass-production manufacturers. With the KW V4, the rolling and pitching movements of the vehicle body are reduced during compression, which means that you benefit from unadulterated directness and sportier handling when driving.

Experience for your Driving Pleasure

For more than 20 years, KW has been the market leader and innovation driver for individual suspension solutions for the road and in racing. No matter where in the world, sporty drivers, car manufacturers and tuners trust in our KW coilovers "Made in Germany".

Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at the company's headquarters in Fichtenberg, Swabia, to meet the high standards of KW quality management.
As a German manufacturer, it goes without saying that KW offers a multi-year warranty on its coilover suspensions, which exceed OEM quality, and on suspension solutions comprising over 4,600 applications.