Kraftwerk

Paragon Performance Brake Discs Grand Cherokee SRT

1 399,00 incl. VAT

2-piece brake discs (1 pair)

Ready for dispatch in 1-2 days

Paragon Performance Brake Discs for Jeep Grand Cherokee 6.4 SRT (Front Axle)

 

Due to the high vehicle weight and the lack of effective brake cooling, premature cracks on the standard brake discs of the Jeep Grand Cherokee SRT are not uncommon after use on the racetrack or under heavy use.
Paragon Performance brake discs can be an effective solution to this problem, while also improving pedal feel and brake control.

The Paragon Performance 2-piece brake disc offers superior braking and cooling efficiency optimised for track use. The directional ventilation fin feature achieves suction and turbulence and directs cool air through the brake disc to improve heat dissipation and increase resistance to cracking under tough track conditions.

The rotor is made of CM-250, a special high carbon cast alloy that ensures optimum bite, thermal properties, high temperature strength and durability.
The rotor rings are heat-treated to relieve stresses in the brake disc and thus prevent deformation and vibration.
They are then turned with a state-of-the-art CBN surface treatment to ensure better running-in with new brake pads.

Vibrations are reduced as the lateral runout of the brake disc is kept within 0.03 mm and the balancing is within 2 grams.
All brake discs have undergone rigorous quality control and testing to ensure that they are fit for purpose.
The two-piece design allows thermal expansion of the brake disc while minimising deformation and ensuring centring of the brake disc to the brake pads.
A slotted brake disc improves braking stability by maintaining a clean contact surface and dissipating the heat and gases generated when the brake pads come into contact with the brake disc.
Slotted brake discs have a decisive advantage over bare brake discs in wet or rainy conditions, as they prevent the formation of water films between the brake pad and the brake disc.
The two-piece Paragon Performance brake discs weigh less than most O.E. brake discs while maintaining thermal load capacity and improve handling by saving unsprung mass.

The aluminium pots are CNC machined from lightweight 6061-T6 aerospace grade aluminium and then hard coated / hard anodised black to provide a non-conductive protective layer. The black hard anodised pots are first hard anodised and then dyed black. They are equivalent in terms of performance/durability.

The black hard coating/hard anodising in accordance with Mil-Spec (MIL-A-8625 Type III) does not discolour in extreme heat. The black hard coating/hard anodised surface is harder, thicker, more wear-resistant and scratch-resistant.

The black hard coat/hard anodised finish provides a thick hard coat that offers greater corrosion resistance and low maintenance durability. A black hardcoat/hard anodised finish holds up better when exposed to ultraviolet (UV) light, which is even more important if the vehicle is frequently parked outdoors.

 

Features:

  • Direct-fit without any modifications and designed to work seamlessly with the Jeep Grand Cherokee SRT's OEM ABS and braking system while maintaining factory brake bias
  • Compatible with OEM brake pads or accessory pads with the same pad depth
  • Can also be installed as an upgrade on vehicles without performance brakes ex works
  • Directional ventilation fins for optimum cooling performance, runs up to 30 % cooler than O.E. brake discs and increases cooling efficiency by up to 30%
  • Fully floating 2-piece construction
  • Weight per brake disc: - kg (- kg lighter than standard)
  • Minimises brake fade and vibrations during longer driving
  • Mounting system for brake disc and cap: H-Bobbin (12 bolts)
  • Great upgrade from non-directional, multi-disc OEM brake discs

 

Delivery includes:

  • One pair (2 pieces) of Paragon Performance 380 mm, 2-piece brake discs with hard/black anodised 6061-T6 aluminium pots, stainless steel bobbins and anti-rattle clips (assembled and ready to install)
  • Detailed installation instructions

 

Mopar comparison numbers:5181513AA, 5181513AB, 5181513AC, 5181513AD, 68256678AA, 68256678AB, 68256679AA, 68256679AB, 68256679AC

 

Fits:

Jeep Grand Cherokee 6.4 2011 – 2021

The price refers to 2 brake discs (one pair).

Additional information

Weight 35 kg
Dimensions 46 × 46 × 38 cm
Aluminum Hat Finishing

black anodised, Mil-Spec hard anodised

Note on anodising the centre pots

Paragon aluminium brake calipers are precision CNC machined from lightweight 6061-T6 aerospace grade aluminium and then black hard coated / hard anodised to provide a non-conductive protective coating.
The black hard-anodised pots are first hard-anodised and then coloured black. They are equivalent in terms of performance/durability.

The black hard coating/hard anodising in accordance with Mil-Spec (MIL-A-8625 Type III) does not discolour in extreme heat. The black hard coating/hard anodised surface is harder, thicker, more wear-resistant and scratch-resistant.

The black hard coat/hard anodised finish provides a thick hard coat that offers greater corrosion resistance and low maintenance durability. A black hardcoat/hard anodised finish holds up better when exposed to ultraviolet (UV) light, which is even more important if the vehicle is frequently parked outdoors.

***Type III Hard anodising of aluminium is considered a functional surface coating process. Although we always strive for colour consistency, due to the nature and variables in the anodising process, slight colour variations may occur from batch to batch.

Reviews

There are no reviews yet

Add a review
Currently, we are not accepting new reviews

You may also like…

Frequently bought together:
Total: 1 737,00
en_GB